FOLDABLE TIP UP TRANSFER PLATE

(COD. RRSCP)

GALLERY | REQUEST INFO | SHARE

Thanks to the RRSCP tip up transfer plate, it is now easier to move from the wheelchair to the car seat. It can be installed on either side of the vehicle. It is mounted on the inner side of the rear door column, therefore it only applies to 5-door vehicles. The most interesting feature of this device is that it can be folded vertically along the column, leaving the floor space near the seat completely free. It can be ordered with or without step padding, depending on the user's needs.

Capacity: 100 Kg

TIP UP LIFTING SEAT 

(COD. VL-20 and COD. VL-40)

GALLERY | REQUEST INFO | SHARE

The tip up lifting seat is a support base that helps you move from a standing to a seated position and vice versa or moving from the seat to the wheelchair. It is activated by a command on the vehicle dashboard that operates an electric control unit controlling the electric servomotor of the device.
The device range is 200 or 400 mm. The support seat can be folded vertically between the seat and the door panel during driving.

If needed, the simple system that restrains the seat to the sliding device, can be quickly disassembled.

Capacity: 110 Kg

FACILITIES

The device benefits from the facilities provided by law 104 and complies with the requirements of "permanent connection to the vehicle" laid down in information protocol 4326 issued on 27/10/2016 by the Ministry of Infrastructure and Transport.

MANUAL TIP UP TRANSFER PLATE

(COD. CASPER EASY)

GALLERY | REQUEST INFO | SHARE

With the manual tip up transfer plate, persons with limited mobility can easily move in and out of the passenger seat. Casper Easy is secured under the original seat guides without any structural changes to the passenger compartment and preserving the proper functioning of the safety devices. Thanks to its small size (width: 250 mm and height: 160 mm) and 25 mm thickness, it fits easily between the seat and the vehicle door. Even in case of prolonged non-use, anchoring system can be easily disassembled.

Capacity: 80 Kg

FACILITIES

Benefits from the facilities provided by law 104 and complies with the requirements of "permanent connection to the vehicle" required by the information protocol 4326 issued on 27/10/2016 by the Ministry of Infrastructure and Transport.

SLIDING REAR DOOR

(COD. PREH)

GALLERY | REQUEST INFO | SHARE

On 5-door vehicles, the rear left side door can be adapted for electrical operation. The device consists of an electric gearmotor plus a number of brackets for attaching it to the vehicle and door.
The door is opened and closed pressing on the rocker switch located on the dashboard, to create the opening required for loading a folding wheelchair.
The device characteristics grant the door airtight closure while driving, avoiding water infiltration and annoying rustling.
The device is also equipped with an emergency opening and closing system, useful in case of power failure.
The device does not require any permanent modifications to the vehicle, which can be restored to the original conditions in case of sale or replacement.
A winch or automatic wheelchair loader can be combined with the rear left sliding door, to further facilitate wheelchair transfer.

WHEELCHAIR HOIST WINCH

(COD. VSTRO)

VIDEO | GALLERY | REQUEST INFO | SHARE

With the help of the wheelchair hoist winch a folding wheelchair is electrically lifted and manually placed inside the vehicle, between the front and rear seats. An electric motor equipped with a pulley, straps and carabiners lifts the wheelchair with the push of a button. It is secured to the vehicle with a pivot installed on the rotating arm of the sliding door. Made of steel, it features a series of adjustments and joints on copper bushings to ensure maximum efficiency. It can be installed on most cars, and also be adapted for lifting various types of folding wheelchairs. Electric and mechanical limit switches guarantee its safe use. 

Lifting capacity: 25 Kg

ROBOT WHEELCHAIR LOADER

(COD. VSCHO)

VIDEO | GALLERY | REQUEST INFO | SHARE

On 5 door vehicles, the robotic wheelchair loading system makes it possible to automatically lift and place a folded wheelchair inside a car. Very little time is required for the arm, operated by a control pad, to hook the wheelchair and place it securely inside the passenger compartment. It can be combined with a sliding door. Safety is guaranteed by electric limit switches that limit any movement and by the possibility of using the device only with the door completely open.
Lifting capacity: 30 Kg

BOOT HOIST "LM/LC/LP"

VIDEO | GALLERY | REQUEST INFO | SHARE

The new boot hoists are very small, they can be easily removed and feature the possibility of multiple adjustments, they are therefore easy to install on all types of vehicles. Supplied as standard: remote control with spiral cable, anchoring systems for wheelchairs or electric scooters (depending on the selected hoist) and adaptable anchor brackets for all makes of vehicle. It is possible to select either manual or electric device rotation on LM models with a 40Kg or 80kg capacity, while electric rotation is standard for LC and LP series models with a minimum capacity of 80Kg and a maximum of 200Kg.

A-HATCH AUTOMATED TAILGATE

(Cod. A-HATCH)

GALLERY | REQUEST INFO | SHARE

A pneumatic cylinder with a stroke of 600 mm powered by a compressor and operated by a control unit, automates the tailgate of different types of vehicles. The tailgate can be opened and closed by a rocker switch located inside the vehicle or an optional wireless control.
If the device is not used, the tailgate can be operated manually as before.

CHAIR TOPPER

(Cod. CHAIR TOPPER)

GALLERY | REQUEST INFO | SHARE

Chair Topper can be easily applied to the roof rack of most vehicles without the need for permanent modifications. It can lift and transfer the majority of folding wheelchairs up to a weight of 20 kg.
Its positioning on the outside of the vehicle leaves the space free in the passenger compartment and keeps it clean on bad weather days.
Operated by an extensible control or, on request, by a wireless control, it does not require much space to load the wheelchair.
The construction quality and design of the device guarantee an excellent resistance to atmospheric agents and a good aerodynamic impact.
Thanks to the selected materials, aluminium and fiberglass, weight was reduced to only 55 KG.

Available for both sides of the vehicle.

BOOT LOADING PLATFORM

(Cod. JOEY LIFT)

GALLERY | REQUEST INFO | SHARE

With Joey Lift you can lift and transfer your wheelchair or scooter into the load compartment of your minivan.
A remote control or, on request, a wireless control, ensures a quick and easy use of the device.
The wheelchair can be locked intuitively and safely outside the vehicle thanks to the platform integrated anchorage.
Safety during travel is further guaranteed by the safety bulkhead, which can be installed on request at the front of the platform.
The device weighs only 92 KG and can lift 159 KG.

PLATFORM MEASUREMENTS:

Length: 71 cm

Width: 99-109 cm (depending on platform configuration

Capacity: 159 Kg