HANDYTECH - CARROZZERIA 71 srl Strada Patro, 3 Moncalvo (AT) - Italie
Tel. +39 0141 917665
Fax. +39 0141 923979
info@handytech.it

Low-floor Vehicles


NEW– CITROËN BERLINGO “HANDY ECO” - Air

TECHNICAL DATA SHEET | GALLERY | REQUEST INFO | SHARE

The new Citroën Berlingo low floor is integrated in the rear of the vehicle. In the short wheelbase version, it can accommodate 1 person in a wheelchair as well as offering 4 comfortable seats.  In the long wheelbase version, the total number of passengers on board rises to 6: 5 original seats + 1 person in a wheelchair

 

Access to the low floor is made easier by a folding light servo-assisted aluminium ramp, which is also available in a floor-mounted folding version covered with non-slip material. The inclination of the low floor has been designed to enhance containment of wheel passengers and improve their view, as well as facilitate interaction with other passengers.

 

With Handy Eco the vehicle can be set-up according to the specific needs of the customer: you can choose to leave the rear compartment completely free for the wheelchair or decide to purchase 1 or 2 rear removable seats or wall-mounted swivel seats. In any case, all wheelchair models can be accommodated, both manual and electronic (short wheelbase version).

In the long wheelbase version, the original seats of the second row are preserved, thus being able to accommodate a higher number of passengers on board. This is the ideal solution for large families, associations or charterers. On request, the AIR version (optional) is also available, with air suspensions that allow the vehicle to lower more for more comfort in getting in and out of the vehicle.

Safety on board is guaranteed by the vehicle standard equipment and by the wheelchair containment and passenger restraint systems, which comply with ISO 10542 standards.

With its diverse equipment solutions, additional internal lighting and various accessories and customizations, this multi-purpose vehicle can match every single need.


LOW FLOOR INTERNAL DIMENSIONS:

Length: 1370 mm (1270 mm on long wheelbase version)

Width: 810 mm

Entry height: 1410 mm

Interior height: 1450 mm

NEW PEUGEOT RIFTER "HANDY ECO" - Air

TECHNICAL DATA SHEET | GALLERY | REQUEST INFO | SHARE

The low floor on the new Peugeot Rifter is integrated in the rear of the vehicle. The short wheelbase version can accommodate 1 person in a wheelchair while maintaining 4 comfortable seats. In the long wheelbase version, the total number of passengers on board rises to 6: 5 original seats + 1 person in a wheelchair

 

The low floor on the new Peugeot Rifter is integrated in the rear of the vehicle. The short wheelbase version can accommodate 1 person in a wheelchair while maintaining 4 comfortable seats.  In the long wheelbase version, the total number of passengers on board rises to 6: 5 original seats + 1 person in a wheelchair

 

Access to the low floor is made easier by a folding light servo-assisted aluminium ramp, which is also available in a floor-mounted fold-out version covered with non-slip material. The inclination of the low floor has been designed to enhance containment of wheelchair passengers and improve their view, as well as facilitate interaction with other passengers on the seats.

 

With Handy Eco the vehicle can be set-up according to the specific needs of the customer: you can choose to leave the rear compartment completely free for the wheelchair or decide to purchase 1 or 2 rear removable seats or wall-mounted swivel seats. In any case, all wheelchair models can be accommodated, both manual and electronic (short wheelbase version).

In the long wheelbase version, the original seats of the second row are preserved, thus being able to accommodate a higher number of passengers on board. This is the ideal solution for large families, associations or charterers. On request, the AIR version (optional) is also available, with air suspensions that allow the vehicle to lower more for more comfort in getting in and out of the vehicle.

Safety on board is guaranteed by the vehicle standard equipment and by the wheelchair containment and passenger restraint systems, which comply with ISO 10542 standards.

With its diverse equipment solutions, additional internal lighting and various accessories and customizations, this multi-purpose vehicle can match every single need.

 

LOW FLOOR INTERNAL DIMENSIONS:

Length: 1370 mm (1270 mm on long wheelbase version)

Width: 810 mm

Entry height: 1410 mm

Interior height: 1450 mm


NEW OPEL COMBO LIFE “HANDY ECO” - Air

TECHNICAL DATA SHEET | GALLERY | REQUEST INFO | SHARE

The low floor on the new Opel Combo Life is integrated in the rear of the vehicle. The short wheelbase version can accommodate 1 person in a wheelchair while maintaining 4 comfortable seats.  In the long wheelbase version, the total number of passengers on board rises to 6: 5 original seats + 1 person in a wheelchair

 

Access to the low floor is facilitated by a folding light servo-assisted aluminium ramp, which is also available in a floor-mounted folding version covered with non-slip material. The inclination of the low floor has been designed to enhance containment of wheelchair passengers wheelchair and improve their view, as well as facilitate interaction with other passengers.

 

 

With Handy Eco the vehicle can be set-up according to the specific needs of the customer: you can choose to leave the rear compartment completely free for the wheelchair or decide to purchase o1 or 2 rear removable seats or wall-mounted swivel seats. In any case, all wheelchair models can be accommodated, both manual and powered (short wheelbase version).

In the long wheelbase version, the original seats of the second row are preserved, thus being able to accommodate a higher number of passengers on board. This is the ideal solution for large families, associations or charterers. On request, the AIR version (optional) is also available, with air suspensions that allow the vehicle to lower more to get in and out of the vehicle.

Safety on board is guaranteed by the vehicle standard equipment and by the wheelchair containment and passenger restraint systems, which comply with ISO 10542 standards.

With its diverse equipment solutions, additional internal lighting and various accessories and customizations, this multi-purpose vehicle can match every single need.

 

LOW FLOOR INTERNAL DIMENSIONS:

Length: 1370 mm (1270 mm on long wheelbase version)

Width: 810 mm

Entry height: 1410 mm

Interior height: 1450 mm



FIAT DOBLO’ AND DOBLO’ MAXI “TRIP”

TECHNICAL DATA SHEET | VIDEO | GALLERY | REQUEST INFO | SHARE

Thanks to the generous dimensions of the vehicle, especially in the Maxi version, there is more than enough space to house a large manual or powered wheelchair. Fiat Doblò can thus boast the most spacious interior compared to other vehicle solutions. The two low-floor versions of the Fiat Doblò, normal and long wheelbase, is integrated in the rear and can accommodate 1 person in a wheelchair, maintaining 4 or 5 comfortable seats.
In the standard version (short wheelbase), the vehicle configuration will consist of 4 seats + 1 wheelchair seat. Given the small dimensions of the rear seats there is ample space between them. The Maxi version (long wheelbase) hosts 5 seats, 2 front and 3 rear seats, + 1 wheelchair seat located behind the rear seats. Access to the low floor is made easier by a light servo-assisted aluminium fold-out ramp, which is also available in a floor-mounted folding version covered with anti-slip material.
Safety on board is guaranteed by the standard equipment of the vehicle and by its wheelchair containment and passenger restraint systems, in compliance with ISO 10542 standards.


LOW FLOOR INTERNAL DIMENSIONS:
Length: 1500 mm
Width: 830 mm
Entry width: 1425 mm
Interior height: 1450 mm


NEW PEUGEOT RIFTER “HORIZON”

TECHNICAL DATA SHEET | VIDEO | GALLERY | REQUEST INFO | SHARE

The new Peugeot Rifter "Horizon" is equipped with a low floor, at the rear of the vehicle, to accommodate 1 wheelchair and its passenger, while maintaining 4 comfortable seats. Access to the lowered floor is via a servo-assisted fold-out ramp in aluminium covered with anti-slip material and equipped with a tilting system to make it foldable. Thanks to the 2 newly designed rear seats, there is enough space to accommodate 1 manual or large powered wheelchair.

The innovative movement of the fold-out access ramp allows the platform to be easily brought back to the "original" state, keeping the load compartment accessible and fully usable. Safety on board is guaranteed by the standard equipment of the vehicle and by the wheelchair containment and passenger restraint systems, in compliance with ISO 10542 standards.

 

LOW FLOOR INTERNAL DIMENSIONS:

Length: 1500 mm

Width: 820 mm

Entry height: 1410 mm

Interior height: 1430 mm


PEUGEOT TEPEE PARTNER “IMPULSE”

TECHNICAL DATA SHEET | VIDEO | GALLERY | REQUEST INFO | SHARE

The “IMPULSE” adaptations and fittings executed exclusively on the Peugeot Partner (small-sized vehicle) allow users to take either the driver’s position, or front passenger position while sitting in their wheelchair, and anchor it with an automatic restraint system. The low floor with its non-slip/soundproof coating, extends the entire length of the vehicle, with a minimum rear width of 840 mm, and a maximum width of 1360 mm at the front, with an entry height of 1430 mm, and interior height of 1490 mm.

The automatic tailgate opening and access ramp, with simultaneous lowering of the rear suspensions, allow quick, easy access to the wide interior space, even with large-sized powered wheelchairs. The folding, wall-mounted seats of the second row allow the vehicle to transport up to 4 passengers, without sacrificing the cargo space provided by a large boot. The variety of driving devices which can be installed match all the different needs, and allow the vehicle to be driven comfortably and safely.


NISSAN e-NV200 EVALIA “HANDY ECO” - Air

TECHNICAL DATA SHEET | GALLERY | REQUEST INFO | SHARE

The small fully-electric, Japanese van, with its exclusive CARWINGS system, compact size and tight turning radius, make it the ideal vehicle for modern urban areas. The lowered floor built on the 100% electric-powered Nissan e-NV 200 EVALIA is integrated in the rear of the vehicle and accommodates 1 wheelchair and its passenger, maintaining 5 comfortable passenger seats. 
Access to the lowered floor is provided by a servo-assisted ramp with a non-slip coating applied to it. A fold-up ramp is available in the ECO version while a short, non-folding is featured in the AIR version. On-board safety is ensured both by the standard vehicle equipment and by the ISO 10542 compliant wheelchair containment and passenger restraint systems. 


LOW FLOOR INTERNAL DIMENSIONS:
Length: 1260 mm
Width: 770 mm
Entry height:: 1440 mm
Interior height: 1470 mm


FORD TOURNEO CONNECT FREEDOM 7 SEATS

TECHNICAL DATA SHEET | GALLERY | REQUEST INFO | SHARE

The low floor built on the Ford Connect 7 seats is integrated in the rear of the vehicle and has enough room to accommodate 1 wheelchair and its passenger, maintaining 5 comfortable passenger seats. Access to the lowered floor is provided by a servo-assisted aluminium ramp covered with a non-slip coating. The ramp has a system of rockers making it collapsible.
The spacious interior can accommodate 1 large-sized manual or electric wheelchair. In addition, the folding wall-mounted seats (optional) in the third row make it possible to comfortably transport 7 passengers, when the wheelchair and its passenger are not being transported. On-board safety is ensured by the vehicle equipment supplied as standard, and by the  ISO 10542 compliant wheelchair containment and passenger restraint systems. 


LOW FLOOR INTERNAL DIMENSIONS:
Length: 1250 mm
Width: 770 mm
Entry height: 1400 mm
Interior height: 1430 mm

PEUGEOT PARTNER TEPEE "HANDY ECO" - Air

VIDEO | GALLERY | REQUEST INFO | SHARE

The new low floor built on the Peugeot Partner Tepee is integrated in the rear of the vehicle and has room to accommodate 1 wheelchair passenger, maintaining 4 comfortable passenger seats. Depending on the original configuration of the vehicle, specifically the rear seats, the 5 seats can be maintained in the absence of the wheelchair. Access to the lowered floor is facilitated by a servo-assisted, folding ramp made of lightweight, aluminium. A collapsible version, with a non-slip coating, is also available. The gradient of the lowered floor has been designed to enhance wheelchair passenger containment, improve their view as well as facilitate interaction with other passengers. The original, reclining and removable rear seats ensure enough space for a manual or electric. On request, the AIR version (optional) is also available (optional), with a pneumatic suspension system to lower the floor even more when getting into/out of the vehicle. On-board safety is ensured by the vehicle equipment supplied as standard, and by the ISO 10542 compliant wheelchair containment and passenger restraint systems.


LOW FLOOR INTERNAL DIMENSIONS:

Length: >1320 mm

Width: 70 mm

Entry height: 1430 mm

Interior height: 1460 mm


NEW FORD TURNEO CUSTOM “INDIPENDENCE”

TECHNICAL DATA SHEET | VIDEO | GALLERY | REQUEST INFO | SHARE

The low floor built on the Ford Tourneo Custom is integrated in the rear compartment of the vehicle and accommodates 2 wheelchairs and their passengers, maintaining 6 or 7 comfortable seats.

Access to the low floor is via a servo-assisted aluminium ramp covered with anti-slip material which, thanks to its short length, does not affect the rear view.

The low floor has been designed to increase internal height for wheelchair passengers, improve their view and facilitate interaction during the journey. Thanks to the generous dimensions of the vehicle, there is more than enough room to accommodate 2 large manual or powered wheelchairs. In addition, thanks to the wall-mounted folding seats, in case of absence of the second wheelchair and its passenger, the vehicle can carry up to 8 people.

Safety on board is guaranteed by the standard equipment of the vehicle and by the restraint systems of the wheelchair and its passengers, which comply with ISO 10542 standards.

With its wide range of fitting solutions, the integrated winch for wheelchair towing, various accessories and customizations this multi-purpose vehicle can meet the needs of associations, public assistance, taxi drivers and individuals.


LOW FLOOR INTERNAL DIMENSIONS:

Length: 2650 mm

Width: 770 mm

Entry height: 1570 mm

Interior height: 1640 mm


CITROEN BERLINGO MULTISPACE "HANDY ECO" - Air

GALLERY | REQUEST INFO | SHARE

The new low floor built on the Citroen Berlingo Multispace is integrated in the rear of the vehicle and has room to accommodate 1 wheelchair passenger, maintaining 4 comfortable passenger seats. Depending on the original configuration of the vehicle, specifically the rear seats, the 5 seats can be maintained in the absence of the wheelchair. Access to the lowered floor is facilitated by a servo-assisted, folding ramp made of lightweight, aluminium. A collapsible version, with a non-slip coating, is also available. The gradient of the lowered floor has been designed to enhance wheelchair passenger containment, improve their view as well as facilitate interaction with other passengers. The original, reclining and removable rear seats ensure enough space for a manual or powered wheelchair. On request, the AIR version (optional) is also available with a pneumatic suspension system to lower the floor even more when getting into/out of the vehicle. On-board safety is ensured by the vehicle equipment supplied as standard, and by the ISO 10542 compliant wheelchair containment and passenger restraint systems.


LOW FLOOR INTERNAL DIMENSIONS:

Length: >1320 mm

Width: 70 mm

Entry height: 1430 mm

Interior height: 1460 mm


RENAULT KANGOO AND WIDE KANGOO "HANDY ECO"

TECHNICAL DATA SHEET | GALLERY | REQUEST INFO | SHARE

The low floor built on the two Renault Kangoo versions, standard and long wheelbase, is integrated in the rear of the vehicle and has room to accommodate 1 passenger seated in his/her wheelchair, maintaining 4 or 5 comfortable passenger seats. In the standard version (short wheelbase), the vehicle has 4 passenger seats + 1 wheelchair position. The seat dimensions leave a space of 440 mm for the wheelchair to ensure passenger comfort. The Grand Kangoo version (long wheelbase), features 5 passenger seats, 2 front and 3 rear, plus 1 wheelchair position located behind the rear bench seats. Access to the lowered floor is facilitated by a servo-assisted, folding ramp made of lightweight, aluminium. A collapsible version, covered with a non-slip coating, is also available. On-board safety is ensured by the vehicle equipment supplied as standard, and by the ISO 10542 compliant wheelchair containment and passenger restraint systems. 

LOW FLOOR INTERNAL DIMENSIONS:
Length: 1260 mm (1240 mm on Grand Kangoo)
Width: 800 mm
Entry height: 1410 mm
Interior height: 1460 mm


VOLKSWAGEN CADDY MAXY "HANDY ECO" -Air

TECHNICAL DATA SHEET | GALLERY | REQUEST INFO | SHARE

The low floor built on the Caddy Maxi is integrated in the rear of the vehicle and has a large space to accommodate a wheelchair and its passenger, while maintaining 5 comfortable passenger seats. Access to the low floor is provided by a servo-assisted aluminium ramp covered with a non-slip coating available in a collapsible version. The gradient of the lowered floor has been designed to enhance the wheelchair passenger restraint system, improve their view and facilitate interaction with other passengers during the journey. 
The vehicle is equipped with a pneumatic suspension system to improve ride comfort, and allow the rear of the vehicle to be lowered during loading, thus reducing the gradient and length of the access ramp. The spacious interior of the vehicle, specifically that of the Maxi version, the original, provides enough room to accommodate a large-sized manual or powered wheelchair. In the absence of the wheelchair and its passenger, the easy assembly of the bench in the third row can comfortably accommodate 7 people. On-board safety is ensured by the standard vehicle equipment and by the ISO 10542 compliant wheelchair containment and passenger restraint systems. 

 

LOW FLOOR INTERNAL DIMENSIONS:
Length: 1450 mm
Width: 760 mm
Entry height: 1420 mm

Interior height:1460 mm